ironmandecal-1

How To Apply Iron Man Decal on a MacBook Pro

Pimp out your shiny MacBook Pro with a cool looking Iron Man decal. It only takes a few minutes to apply and cost under $15 dollars! We show you how.

For this demonstration we got us an awesome Iron Man limited edition decal from Etsy designed by macbookdecal4u. What’s so special about this decal is that its got a limited print run of only 500 copies. It’s made up of high quality material and the design looks pretty cool.

The instructions are simple. First clean the surface of your MacBook Pro with a non abrasive cloth and plain water. I used an anti-static office wipe. Make sure to remove any dirt, dust and any sign of finger prints. This will make the decal stick to the desired surface easily and last for a long time.

The decal has a protective transfer clear tape on the front and a paper backing. Try to think about how you’re going to position it on your MacBook Pro then decide on the best location. Now peel the paper backing away from the decal slowly. Be sure that the decal stays attached to the clear transfer tape. Try peeling the backing paper from a different corner if the decal won’t stay on the clear paper. This will take a couple of trial and error until you get it right.

Once the backing paper is removed, the decal should still be on the transfer clear tape and you’re ready to stick it on. Use a credit card or a driver’s license to apply pressure on the entire surface of the transfer clear tape. Check for any air bubbles and rub them off. Now slowly peel off the transfer tape. Use a needle to make a small pin hole for any leftover bubbles.

And that’s it! Enjoy your fully pimped out MacBook Pro.